Check your PayPal shipping addresses BEFORE you order a kit, I will no longer make changes for people and just cancel your order.
More Kits will be available in mid June 2020. Join the Wish List (Mailing List) to be notified when there is stock
Assemble instructions, build video and software are here >>> https://sudomod.com/mintypi-lite-build-guide/
The kit includes the following ONLY! (if it’s not on this list it’s NOT INCLUDED) :
- Controller PCB w/ L&R Board
- FPC Ribbon (to connect LCD board to the Controller PCB)
- LCD PCB with the 2.4 inch LCD soldered onto it
- Power Board with optional Battery Connector and L/R board solder points
- Power Slide Switch
- Tactile Menu Button (Requires soldering to the Controller PCB)
Suggested to use 5V phone chargers for the mintyPi Lite along with a USB-C cable or one of the 3in1 cables I offer on my site! 9V USB-C chargers should be compatible with the kits except the Nintendo Switch, Google Pixel and Samsung S10 chargers .
There is the optional battery for the build which for the time being will be sold to Mexico, Canada and USA customers only. There reason for this is the extra customs paper work and cost in shipping them out (I didn’t make the laws but must abide by them). You can also use a Lipo Pouch battery since the battery connector is now an optional part you solder on so there are more options to power this kit.
Not Included are the 3D parts or the Custom Silicone buttons specifically made for the mintyPi Lite. These can be bought from Wermy from Sudomod below:
DISCLAIMER!!: Since this is a VERY DIY project with a lot of soldering involved I am not responsible for repairing or replacing parts you damage in the attempt of soldering the Pi to the PCBs I am offering in this kit. Again if it’s not pictured here then it is not included.
Please consider getting the mintyPi practice boards before attempting this project so there will no damaged boards in your assembly as I will not have extras to replace them.
Get them here from OSHPark.com (you need both sets):